Industrial IoT Wireless Module for Raspberry Pi CM4 with 4G
Industrial IoT Wireless Module for Raspberry Pi CM4 with 4G
RPi CM4 is NOT included.
Suitable For IoT Applications Like IoT Getaway, Wireless Router, Intelligent Data Acquisition...
This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allowing an additional 4G communication module to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC.
Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.
Specifications
| CM4 SOCKET | suitable for all variants of Compute Module 4 |
|---|---|
| NETWORKING | Gigabit Ethernet RJ45 |
| M.2 B KEY / Mini-PCIe (via adapter) | |
| Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G communication | |
| USB | USB 2.0 × 3 |
| PIN HEADER | Non-isolated RS485 × 2, Non-isolated CAN × 1, Partial GPIO pins |
| CAMERA | MIPI CSI-2 × 1 (15pin 1.0mm FPC connector) |
| VIDEO | HDMI × 1, supports 4K 30fps output |
| RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
| STORAGE | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
| FAN HEADER | 5V/12V, allows speed adjustment and measurement |
| POWER INPUT | 5V or 7~36V |
| DIMENSIONS | 145 × 90 × 40mm |
Connecting With Compute Module 4
Standard CM4 Socket And Partial Raspberry Pi GPIO Header
Suitable For Compute Module 4 Lite/EMMC Series Module
4G/5G/LoRa Wireless Modules Support
Onboard M.2 Slot, Comes With Mini-PCIe Adapter As Well,
Compatible With 4G/5G/LoRa Wireless Modules With M.2 Or Mini-PCIe Interface
- 4G/3G communication, GNSS positioning, global coverage
- Standard Mini-PCIe interface, high compatibility
- Multi-constellation high accuracy positioning GNSS receiver support
- Suitable for LTE, UMTS, and GSM network with global coverage
- Abundant software functions: OTA, LBS, TLS, VoLTE
- Up to 150Mbps (Max) downlink data rate and 50Mbps (Max) uplink data rate
- Supports popular OS driver: Windows, Linux, Android etc.
- AT commands of the SIM7600G-H-PCIE series are compatible with the SIM7500/SIM7600 series modules
Rich Interfaces
Providing Interfaces Including: CSI / HDMI / USB / ETH / CAN / RS485 / M.2 B KEY
Rail-Mount Support
Rail-Mount ABS Protection Case, Easy To Install, More Safe Operation
What's On Board
-
CM4 socket
suitable for all variants of Compute Module 4 -
HDMI connector
supports 4K 30fps output -
USB 2.0 ports
3x USB 2.0, for connecting sorts of USB devices -
RJ45 Gigabit Ethernet
10/100/1000M compatible -
DC power supply
7 ~ 36V DC input -
CM4 status indicator
PWR: Raspberry Pi power indicator
ACT: Raspberry Pi operating status indicator -
4G/5G module status indicator
M.2 PWR: module enable indicator
M.2 NET: module operating status indicator -
PWR & USB
5V DC power supply or USB programming port -
M.2 B KEY
supports 4G/5G modules, or other communication modules using USB channel -
Nano-SIM card slot
supports standard Nano-SIM card for 5G/4G/3G/2G communication -
BOOT selection
ON: CM4 will be booted from USB-C interface
OFF: CM4 will be booted from eMMC or Micro SD card -
DC power supply
7 ~ 36V DC input -
Dual non-isolated RS485
2x RS485, with 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R optional balancing resistor jumper)
-
Non-isolated CAN
ESD protection and transient spike voltage protection (reserved 120R optional balancing resistor jumper) -
Micro SD card slot
for connecting a Micro SD card with pre-burnt image (Lite variant ONLY) -
FAN header
for connecting cooling fan, allows speed adjustment and measurement -
CAM
MIPI CSI camera port, 15Pin 1mm pitch -
RTC battery holder
supports CR1220 button cell -
M.2 VCC selection
select 3.3V or 4.2V power supply -
RTC interruption configuration
PI-RUN: CM4 will reboot on RTC interruption
GL-EN: CM4 powerdown on RTC interruption
D17: D17 pin is triggered on RTC interruption (default) -
IO-VREF selection
set the CM4 IO logic level as 3.3V (default) or 1.8V -
FAN power supply selection
select 12V (default) or 5V power to drive the fan -
System function configuration
BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY
WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY
WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card -
RTC/FAN I2C bus selection
SDA0/SCL0: I2C-10 is shared with CSI/DSI (default)
GPIO3/2: I2C-1 is shared with GPIO header -
Partial GPIO header
including 1x I2C, 2x GPIO pins, and power supply
Outline Dimensions
