Isolated RS485 CAN HAT For Raspberry Pi, 2-Ch RS485, 1-Ch CAN
Isolated RS485 CAN HAT For Raspberry Pi, 2-Ch RS485, 1-Ch CAN
Bulit-In Power Supply Isolation, ADI Magnetical Isolation, And TVS Diode, Etc.
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN
- 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485
- Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time
- Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
- Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
- Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance
- Onboard 120Ω terminal resistor, configured by jumper
- Onboard terminals and pin headers, more convenient connection
- Breakout SPI control pins, for connecting with host control boards
Specifications:
| EXPANDED INTERFACE | 2-Ch RS485 + 1-Ch CAN |
|---|---|
| COMMUNICATION INTERFACE | SPI |
| CAN CONTROLLER | MCP2515 |
| CAN TRANSCEIVER | SIT65HVD230DR/SN65HVD23D |
| CAN BAUD RATE | ≦1Mbps |
| UART EXPANSION CHIP | SC16IS752 |
| RS485 TRANSCEIVER | SP3485 |
| RS485 BAUD RATE | 300~921600 bps |
| POWER SUPPLY | External power supply terminal OR Raspberry Pi |
| EXTERNAL POWER SUPPLY RANGE | DC 8~28V |
| OPERATING VOLTAGE | 3.3V |
| DIMENSIONS | 65 × 56.5 mm |
What Can It Do?
Enable Isolated And Stable RS485 And CAN Capability For Your Raspberry Pi
Connect To Raspberry Pi Series
Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards
Expand 1-Ch CAN And 2-Ch RS485
CAN: Adopts Controller MCP2515 With CAN Transceiver
RS485: Adopts SC16IS752 And SP3485 Dual-Chip Combination
Industrial Grade Isolation Protection
- Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
- Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption
What's On Board
Chip Features
-
MCP2515
CAN controller -
SIT65HVD230DR/SN65HVD23D
CAN transceiver -
SP3485
RS485 transceiver -
SC16IS752
UART expansion -
π163M31
digital isolator -
B0505LS-1W
Power supply isolation
Others
-
Power supply interface
DC 8~28V, can power the HAT and Raspberry Pi -
RS485 bus interface
Connect via screw terminals/pin header -
CAN bus interface
Connect via screw terminals/pin header - Raspberry Pi GPIO header
-
SPI control header
for connecting with host boards like STM32/Arduino -
CAN terminal resistor jumper
Switch to 120Ω by default -
RS485 Terminal resistor jumper
Switch to 120Ω by default - Power Indicator
Pin Definition
Outline Dimensions
