R718N315 Netvox LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

Description

R718N315 Netvox LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

The NETVOX wireless three-phase current detector is used to detect three-phase electrical input current.
The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol, and joins the gateway to display the collected data in the gateway.
The device is powered by a battery and receives AC current through a current transformer. This device adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.

The communication is fully compatible with LoRaWAN™ Protocol (Class A).

Features:

  • Wireless Range of 10 Km
  • LoRaWAN™ Class A Compatible
  • Frequency Hopping Spread Spectrum (FHSS)
  • Improved Interference Immunity
  • Improved Power Management For Longer Battery Life
  • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
  • Battery Life*2:
    ⁻ 5 Years

     (Conditions: Ambient Temperature 25 °C, 20 Triggers/Day, Txpower = 20dBm, LoRa Spreading Factor SF = 10)

  • Over-The-Air Updates

  • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)

  • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne

    Battery: https://www.iot-store.com.au/products/er14505-2400mah-3-6v-lithium-battery-aa-cell

    Electric

    Input Power

    2 X 3.6V ER14505 AA Lithium Batteries 
    (3.6V, 2400mah/Section)

    Sleeping Current

    25uA

    Wake Up Current

    7mA

    Receiving Current (Max)

    11mA @3.3V            

    Transmitting Current (Max)

    127mA @3.3V               

    Battery Voltage Measurement
    Accuracy

    ±0.1V

    Current Measurement Accuracy

    <+-1%

    Current Measurement Accuracy Range

    1A To 150A 
    (Depending On The Current Transformer Configuration)


    Frequency

    TX Power

    19dBm±1dBm

    Rx Sensitivity

    -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
    -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

    Antenna Type

    Build-In Antenna

    Communication Range

    Up To10 Km, The Actual Transmission Distance Depends On The Environment.

    Data Transfer Rate

    0.3kbps~50kbps

    Spread Technique

    LoRa/FSK

    Available Frequency

    AU915-928,AS923


    Physical

    Dimension

    Main Part: L: 112mm*W: 65mm*H: 32mm

    Weight

    141g

    Environment Temperature Range

    -20℃ ~ 55℃

    Environment Humidity Range

    <90% RH  (No Condensation)

    Storage Temperature

    -40°C~+85°C

     

    Documentation:

    Datasheet

    User manual

    Netvox LoRaWAN Catalog 

    Payload Format and Examples

    Netvox LoRaWAN Application Command V1.8.6

    Example of payload (ConfigureCmd)_R718CK2

    example of payload (ReportDataCmd)

    Frequency Conversion (Sub frequencies of AU915)

    Lora Calibrate Tool User Manual

    Programming Instruction STlink

     

     

    R718N315 Netvox LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

    Product form
    Free pickup in our shop(s)

    SKU: R718N315-915

    $369.00 $349.00 Excl. GST

    $349.00
    Product available in stock.

      • We ship from our stock in AU (Perth), pickup by prior booking
      • We Offer Quantity Discounts for Large Orders 10+ qty (Request Quote)
      • We accept Purchase Orders & Net 30-day Payment for Eligible Accounts

      Description

      R718N315 Netvox LoRaWAN Wireless 3-Phase Current Meter With 3 X 150A Clamp-On CT

      The NETVOX wireless three-phase current detector is used to detect three-phase electrical input current.
      The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol, and joins the gateway to display the collected data in the gateway.
      The device is powered by a battery and receives AC current through a current transformer. This device adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.

      The communication is fully compatible with LoRaWAN™ Protocol (Class A).

      Features:

      • Wireless Range of 10 Km
      • LoRaWAN™ Class A Compatible
      • Frequency Hopping Spread Spectrum (FHSS)
      • Improved Interference Immunity
      • Improved Power Management For Longer Battery Life
      • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
      • Battery Life*2:
        ⁻ 5 Years

         (Conditions: Ambient Temperature 25 °C, 20 Triggers/Day, Txpower = 20dBm, LoRa Spreading Factor SF = 10)

      • Over-The-Air Updates

      • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)

      • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne

        Battery: https://www.iot-store.com.au/products/er14505-2400mah-3-6v-lithium-battery-aa-cell

        Electric

        Input Power

        2 X 3.6V ER14505 AA Lithium Batteries 
        (3.6V, 2400mah/Section)

        Sleeping Current

        25uA

        Wake Up Current

        7mA

        Receiving Current (Max)

        11mA @3.3V            

        Transmitting Current (Max)

        127mA @3.3V               

        Battery Voltage Measurement
        Accuracy

        ±0.1V

        Current Measurement Accuracy

        <+-1%

        Current Measurement Accuracy Range

        1A To 150A 
        (Depending On The Current Transformer Configuration)


        Frequency

        TX Power

        19dBm±1dBm

        Rx Sensitivity

        -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
        -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

        Antenna Type

        Build-In Antenna

        Communication Range

        Up To10 Km, The Actual Transmission Distance Depends On The Environment.

        Data Transfer Rate

        0.3kbps~50kbps

        Spread Technique

        LoRa/FSK

        Available Frequency

        AU915-928,AS923


        Physical

        Dimension

        Main Part: L: 112mm*W: 65mm*H: 32mm

        Weight

        141g

        Environment Temperature Range

        -20℃ ~ 55℃

        Environment Humidity Range

        <90% RH  (No Condensation)

        Storage Temperature

        -40°C~+85°C

         

        Documentation:

        Datasheet

        User manual

        Netvox LoRaWAN Catalog 

        Payload Format and Examples

        Netvox LoRaWAN Application Command V1.8.6

        Example of payload (ConfigureCmd)_R718CK2

        example of payload (ReportDataCmd)

        Frequency Conversion (Sub frequencies of AU915)

        Lora Calibrate Tool User Manual

        Programming Instruction STlink

         

         

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account