LoRaWAN Network Mapper Kit LongFi for any LoRaWAN Network Monitor
LoRaWAN Network Mapper Kit LongFi for any LoRaWAN Network Monitor
Build your own LoRaWAN Mapper Node with the WisBlock-based solution.
One of the use case for this LoRaWAN Network Mapper is for Helium public network.
Helium Mappers is a community-driven project looking to provide information about the effective coverage for nodes (LoRaWAN end devices) within the Helium Network. The coverage map is available at mappers.helium.com.
The Helium Mapper Kit includes everything to build a Helium Mapper in a short time. The WisBlock Core modules are already flashed with the Helium Mapper Firmware. All you have to do is to set up the connection to your Helium Console. Follow the guide on Make a Helium Mapper With The WisBlock article to set up your Helium Mapper in a very short time.
Important information: The kits do not include a battery
Note: If a non-rechargeable battery is used with WisBlock Base Board it has to be unplugged before connecting the USB cable to the port on the board in order to configure the device. Not doing so might damage the battery and cause damage to the battery and board.
The kit contains an IP64 enclosure with a solar panel so that your Helium Mapper does not run out of battery while you help the community to build up the World Map of Helium Hotspots Coverage.
Package Inclusion
- Solar Panel Helium Mapper Kit
- RAK5005-O
- RAK4631
- RAK1904
- RAK1910
- RAKBox-B2
- LoRa antenna
- BLE antenna
- GPS antenna
Tutorial and Quickstart Guides
