| Hardware Specifications |
Cellular Interface |
Antenna |
1 x SMA-K Note: North America models: 2 x SMA 4G antenna connectors. |
| SIM card |
1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots |
| Ethernet |
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
| 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection |
| Indicators |
LED |
PWR: always on after powered on WLAN: always solid on when WiFi is enabled and working properly WAN: solid when cable is connected, blinking when data is transmitting and receiving LAN:solid when cable is connected, blinking when data is transmitting and receiving 2/3/4G mode indicator: 2G led is on after connected to 2G network 3G led is on after connected to 3G network Both leds is on after connected to 4G network Signal strength:4 solid bars,strongest signal |
| WiFi Interface |
Standards & Frequency |
IEEE 802.11b/g/n,2.4GHz, AP mode |
| Data speed |
IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps |
| Antenna |
1 x SMA-K |
| Transmission distance |
80 meters by line of sight.Actual transmission distance depends on environment of the site. |
| Power Supply |
Adaptor |
DC 12V/1A |
| Connector |
DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or 2 PIN 5.08mm industrial terminal block,reverse polarity protection |
| Input voltage |
DC 9~36V |
| Working power |
Average 270mA/12V |
| Serial Interface |
RS485/RS232(alternative) |
3 PIN 3.81mm industrial terminal block. Note:RS485 default,RS232 please contact sales. |
| Baud rate(bps) |
1200,2400,4800,9600,19200,38400,57600,115200,230400 |
| Data bits |
8 |
| Stop bits |
1,2 |
| Parity |
NONE,ODD,EVEN |
Physical Characteristics |
Housing |
Metal shell,IP30 |
| Dimensions |
112.0*84.0*25.0 mm(L*W*H) |
| Installation method |
Panel mounting, DIN-Rail mounting |
| EMC |
Static IEC61000-4-2, level 2 Pulsed Electric Field IEC61000-4-4, level 2 Surge IEC61000-4-5, level 2 |
| Operating temperature |
-20℃~+70℃ |
| Storage temperature |
-40℃~+125℃ |
| Operating humidity 5 |
5%~95%RH(non-condensing) |
| Others |
Reload |
Pinhole reset button |
| TBD |
Debug interface (TTL Level) |
| Embedded Watchdog |
Device runs self-detection, auto recovers from malfunctions |
| Certificate |
CE,CCC |
| Software Specifications |
Network Connection |
WAN protocol |
PPP, PPPoE, DHCP client |
| LAN protocol |
ARP, DHCP server, NAT |
| 4G network access |
Auto APN/VPDN, private network Access authentication: CHAP/PAP |
| WLAN security |
Open system,WPA/WPA2 PSK TKIP/AES encryption |
| IP routing |
Static routing |
| Network diagnosis |
Ping,route trace,DNS |
| Serial modem |
Work mode |
NET,HTTPD |
| Sockets |
4 sockets,4 centers ,TCPS(SOCKA)/TCPC/UDPS/UDPC |
| Modbus RTU toTCP |
Support |
Device management |
Configuration |
Web |
| Remote management |
Telnet, SSH, AT command,SNMP |
| PUSR platform |
Remote monitoring,remote upgrade,alarming,base station location,remote access to web pages of the router |
| Security |
Failover backup |
Failover between 4G and WAN, ensures automatic switch to alternative backup connection |
| Firewall |
DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control |
| VPN |
Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols |
| Service |
DDNS |
Remote access the device through domain name |
| Alarm |
Email,SMS |
| Others |
NTP client Timing task |
| Region |
EMEA&Australia & Latin America & New Zealand |
| Frequency |
TDD-LTE |
B38/B40/B41 |
| FDD-LTE |
B1/B3/B5/B7/B8/B20/B28 |
| WCDMA |
B1/B5/B8 |
| GSM/GPRS/EDGE |
850/900/1800MHz |