R718N325 Netvox LoRaWAN Wireless 3-Phase Current Meter with 3 X 250A Clamp-On CT

Description

R718N325 Netvox LoRaWAN Wireless 3-Phase Current Meter with 3 X 250A Clamp-On CT

The R718N325 Netvox wireless three-phase current detector is used to detect three-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol, and joins the gateway to display the collected data in the gateway. The R718N325 is powered by a battery and receives AC current through a current transformer. The R718N325 adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.

Features:

  • LoRaWAN™ Class A compatible
  • Frequency Hopping Spread Spectrum (FHSS)
  • Improved Interference Immunity
  • Improved Power Management For Longer Battery Life
  • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
  • Battery Life: Please Refer To Web: Http://Www.Netvox.Com.Tw/Electric/Electric_calc.Html
  • Over-The-Air Updates
  • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)
  • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne
  • R718X Series Carry Magnets Which Can Be Attached To Ferromagnetic Materials And Objects

      Battery: https://www.iot-store.com.au/products/er14505-2400mah-3-6v-lithium-battery-aa-cell

      Electric

      Input Power

      2 X 3.6V ER14505 AA Lithium Batteries 
      (3.6V, 2400mah/Section)

      Sleeping Current

      25uA

      Wake Up Current

      7mA

      Receiving Current (Max)

      11mA @3.3V            

      Transmitting Current (Max)

      127mA @3.3V               

      Battery Voltage Measurement
      Accuracy

      ±0.1V

      Current Measurement Accuracy

      <+-1%

      Current Measurement Accuracy Range

      1A To 250A 
      (Depending On The Current Transformer Configuration)


      Frequency

      TX Power

      19dBm±1dBm

      Rx Sensitivity

      -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
      -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

      Antenna Type

      Build-In Antenna

      Communication Range

      Up To10 Km, The Actual Transmission Distance Depends On The Environment.

      Data Transfer Rate

      0.3kbps~50kbps

      Spread Technique

      LoRa/FSK

      Available Frequency

      AU915-928,AS923


      Physical

      Dimension

      Main Part: L: 112mm*W: 65mm*H: 32mm

      Weight

      141g

      Environment Temperature Range

      -20℃ ~ 55℃

      Environment Humidity Range

      <90% RH  (No Condensation)

      Storage Temperature

      -40°C~+85°C

       

      Documentation:

      Datasheet

      User Manual

       

      Netvox LoRaWAN Catalog 

      Payload Format and Examples

      Netvox LoRaWAN Application Command V1.8.6

      Example of payload (ConfigureCmd)_R718CK2

      example of payload (ReportDataCmd)

      Frequency Conversion (Sub frequencies of AU915)

      Lora Calibrate Tool User Manual

      Programming Instruction STlink

      R718N325 Netvox LoRaWAN Wireless 3-Phase Current Meter with 3 X 250A Clamp-On CT

      Product form
      Free pickup in our shop(s)

      SKU: R718N325-915

      $399.00 $379.00 Excl. GST

      $379.00
      Product available in stock.

        • We ship from our stock in AU (Perth), pickup by prior booking
        • We Offer Quantity Discounts for Large Orders 10+ qty (Request Quote)
        • We accept Purchase Orders & Net 30-day Payment for Eligible Accounts

        Description

        R718N325 Netvox LoRaWAN Wireless 3-Phase Current Meter with 3 X 250A Clamp-On CT

        The R718N325 Netvox wireless three-phase current detector is used to detect three-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol, and joins the gateway to display the collected data in the gateway. The R718N325 is powered by a battery and receives AC current through a current transformer. The R718N325 adopts open-loop current transformer, which can be easily connected to the device to be tested. The A phase line, the B phase line and the C phase line of the three-phase electric power are respectively connected to the corresponding current transformers.

        Features:

        • LoRaWAN™ Class A compatible
        • Frequency Hopping Spread Spectrum (FHSS)
        • Improved Interference Immunity
        • Improved Power Management For Longer Battery Life
        • Encrypt-RF™ Security (Diffie-Hellman Key Exchange + AES-128 CBC For Sensor Data Messages)
        • Battery Life: Please Refer To Web: Http://Www.Netvox.Com.Tw/Electric/Electric_calc.Html
        • Over-The-Air Updates
        • Third-Party Online Wireless Sensor Monitoring And Notification System To Configure Sensors, View Data And Set Alerts Via SMS Text And Email (Optional)
        • Available Third-Party Platform: Actility/ThingPark, TTN, MyDevices/Cayenne
        • R718X Series Carry Magnets Which Can Be Attached To Ferromagnetic Materials And Objects

            Battery: https://www.iot-store.com.au/products/er14505-2400mah-3-6v-lithium-battery-aa-cell

            Electric

            Input Power

            2 X 3.6V ER14505 AA Lithium Batteries 
            (3.6V, 2400mah/Section)

            Sleeping Current

            25uA

            Wake Up Current

            7mA

            Receiving Current (Max)

            11mA @3.3V            

            Transmitting Current (Max)

            127mA @3.3V               

            Battery Voltage Measurement
            Accuracy

            ±0.1V

            Current Measurement Accuracy

            <+-1%

            Current Measurement Accuracy Range

            1A To 250A 
            (Depending On The Current Transformer Configuration)


            Frequency

            TX Power

            19dBm±1dBm

            Rx Sensitivity

            -136dBm (LoRa,Spreading Factor=12, Bit Rate=293bps )
            -121dBm (FSK,Frequency Deviation=5kHz, Bit Rate=1.2kbps)

            Antenna Type

            Build-In Antenna

            Communication Range

            Up To10 Km, The Actual Transmission Distance Depends On The Environment.

            Data Transfer Rate

            0.3kbps~50kbps

            Spread Technique

            LoRa/FSK

            Available Frequency

            AU915-928,AS923


            Physical

            Dimension

            Main Part: L: 112mm*W: 65mm*H: 32mm

            Weight

            141g

            Environment Temperature Range

            -20℃ ~ 55℃

            Environment Humidity Range

            <90% RH  (No Condensation)

            Storage Temperature

            -40°C~+85°C

             

            Documentation:

            Datasheet

            User Manual

             

            Netvox LoRaWAN Catalog 

            Payload Format and Examples

            Netvox LoRaWAN Application Command V1.8.6

            Example of payload (ConfigureCmd)_R718CK2

            example of payload (ReportDataCmd)

            Frequency Conversion (Sub frequencies of AU915)

            Lora Calibrate Tool User Manual

            Programming Instruction STlink

            Recently viewed products

            Login

            Forgot your password?

            Don't have an account yet?
            Create account